Tri Eye TurtleJacket

Strictly out of our personal interest we made this special version of TurtleJacket.

As you can see in the picture we attached a round place with six holes on top of the TurtleJacket. to which you can mount 3 different lens similar to the old time 8mm movie camera.  The remaining 3 holes are dummy.  Regardless of which lens you are using you only have to rotate 60 degree in either direction to take normal picture.

To rotate the round lens mount plate you need to pull the plate up against the spring then rotate it in either direction.  There are two openings on the TurtleJacket to secure the position.

The commonly available nut is temporaly used to secure the spring and the plate.  If we ever decided to sell this version we will replace it with more suitable one.

The picture shown here has 3 lens attached to the plate including 1 long monocle lens.  If you want to attach the monocle you can not use other lens as the body of the monocle will be in sight no matter what you use. We therefore recommend using the combination of telephoto, wide and fisheye lens.

This sample photo is taken by the normal iPhone.

This sample photo is taken using the monocle but without tripod making a bit shaky.  We used the digital zoom to trim the outer area but a bit of dark area is seen at the upper right corner as the monocle may be off center.

If you wish to use the monocle we strongly recommend using the monocle 37mm adapter with the regular version of TurtleJacket.